logo for EES website





 
HOME
FROM CEO
SERVICES
RULES 1121/1146.2
CERTIFICATIONS
RULE 1147
RFQ
CONTACT US
 




   SERVICES

EES offers testing and consulting services for a wide variety of industries. EES personnel have provided service for petroleum refineries, oil and gas production facilities, paint and coating companies, aerospace companies, power and co-generation plants, public utilities, steam generating plants, government service industries and small businesses.


It Is a Privilege To Serve You

The service capabilities of our company for stationary source emissions testing are listed below. Click each item for detailed description.
  1. Regional Source Testing Experience
  2. Personnel Source Testing Experience
  3. Source Testing Experience
  4. Air Emissions Compounds Source Testing
  5. Source Testing Equipment
  6. Representative Source Testing Projects






instrument panel view to show readings of pollutant, toxic air, NOX, etc.

  1. Regional Source Testing Experience

    EES’ Source Testing Team is experienced with source testing in many different locales. EES’ personnel have accomplished stationary source emissions tests at facilities throughout Western United States, including,
    Southern California.

    Go To Top

  1. Personnel Source Testing Experience

    EES’ personnel are experienced in source testing of all major criteria and toxic air emissions. EES’ source test personnel have performed source tests pursuant to the requirements of state and local air pollution control agencies. In Southern California, EES personnel have conducted source tests for both RECLAIM and non-RECLAIM facilities. EES personnel are certified to conduct source testing per California’s South Coast Air Quality Management District's (SCAQMD) air regulations and testing requirements, which are the strictest and most complex in the Nation. EES personnel are also certified by California Air Resources Board (ARB) in their Independent Contractor Program.

    Go To Top

  1. Source Testing Experience

    EES’ personnel are experienced with testing a wide range of equipment in a variety of industrial settings. Included is the following equipment:
  • Internal Combustion Engines
  • Emergency Generators
  • Co-generation Power Plant
  • Heater
  • Crude oil Heater
  • Boiler
  • Boiler with SCR
  • Boiler Certification Testing
  • Utility Boilers and Steam Turbine Electric Generator
  • Gas Turbine
  • Simple Cycled Combustion Turbine with SCR
  • Afterburner
  • Thermal Oxidizer/RTO
  • Portable Thermal Oxidizer
  • Catalytic Oxidizer
  • Landfill Gas Flare
  • Portable Digester Gas Flare
  • Baghouse
  • Smog Hog
  • Paint Spray Booth
  • Chiller
  • Scrubber
  • Biofilter
  • Chrome Plating Tank
  • Induction Furnace
  • Pre-Heat Furnace
  • Heat Treating Furnace
  • Annealing Furnace
  • Zinc Pot Furnace
  • Galvanizing Furnace
  • Burn-off Furnace
  • Combustion Tunnel
  • Dry-off and Curing Ovens
  • Fluidized Bed Rotary Dryer
  • Primer/Top Coat Finish Oven
  • Electrostatic Precipitator
  • Tenter Frame (Textile Industry)
  • Hepa Filtration System Wet Vapor Nitrogen Sodium Processing Remediation System
  • Incinerator/Atomizer equipped with Fluidized bed for Wastewater Reclamation Facility
           Go To Top

  1. Air Emissions Compounds source Testing

    EES is experienced in source testing all major air pollutants. Source tests have recently been conducted for the following compounds:
  • Oxides of Nitrogen
  • Oxides of Sulfur
  • Carbon Monoxide
  • Total Particulate Matter, PM10 and PM2.5
  • Total Non-Methane Hydrocarbons (Volatile Organic Compound)
  • Methane
  • Carbon Dioxide
  • Trace Organics
  • H2S and Reduces Sulfur Compounds



  • Toxic Air Contaminants includes but not limited to:
    • Multi-Metals
    • Total and Hexavalent Chrome
    • Gaseous Chloride and Fluoride
    • Aldehydes
    • Inorganic Lead
    • Beryllium
    • Low and High Concentrations Benzene
    • Inorganic Arsenic
    • Inorganic Cadmium
    • Total Nickel
    • Dioxin
    • Polycyclic Aromatic Hydrocarbon (PAH)
           Go To Top

  1. Source Testing Equipment

    EES’ source testing equipment also includes:
  • Chemiluminescence NOx (Oxides of Nitrogen) Analyzer
  • Non-Dispersive Infrared CO (Carbon Monoxide) Analyzer
  • Non-Dispersive Infrared CO2 (Carbon Dioxide) Analyzer
  • Electro-Chemical and Paramagnetic O2 (Oxygen) Analyzer
  • UV SOx (Oxides of Sulfur) Analyzer
  • Flame Ionization Detector THC (Total Hydrocarbon) Analyzer
  • Complete sets of Isokinetic sampling trains with Apex Instruments dry gas meter boxes and other accessories
  • Low Flow Sampling Dry Gas Meter with built-in pump
  • Tedlar bags with evacuated chambers
  • Different sizes of pitot tube with temperature sensors and portable magnehelics
  • Portable Analyzer (Testo)
           Go To Top

  1. Representative Source Testing Projects

    EES has performed many air quality project works for clients. Representative source testing projects have included:
  • Rule 1147 Source Testing for Miscellaneous Sources (Spray Booth Heater, Furnace, Oven, RTO etc.) for various industries.
  • Source emissions testing on Major, Large and Process NOX sources for RECLAIM facilities.
  • 3 Run RAA Audit Test for RECLAIM and Acid Rain Facilities contracted and funded by SCAQMD and EPA.
  • Relative Accuracy Test Audits and CEMS Certification.
  • Boiler Source Testing–Annual Compliance required as per SCAQMD Rule 1146 for various facilities.
  • Boiler Source Testing-as per Rule 1146.1 requirement for various facilities.
  • Boiler Source Testing-Unit equipped with SCR for the various facilities.
  • Oil Heater (Natural Gas-fired) testing for various facilities.
  • Ammonia Emissions Monitoring for various Boilers and ICEs.
  • ICE Source testing-Tri-annual/Bi-Annual compliance required as per SCAQMD Rule 1110.2 including periodic monitoring using portable analyzer (Also helping the facilities with their Inspection and Monitoring Plan).
  • ICE Source testing-ICE installed with CEMS, fired with Digester gas serving local Sanitation District.
  • Source emissions testing on Diesel-Fired Generator to comply with SCAQMD Rule 1470.
  • Destruction Efficiency testing for Volatile Organic Compounds and Ethanol emissions for a RTO serving Bakery Industry.
  • Destruction Efficiency testing for Volatile Organic Compounds for a RTO serving a Spa manufacturer.
  • Destruction Efficiency testing for Volatile Organic Compounds for a RTO serving a major advertisement printing company.
  • Destruction Efficiency testing for Volatile Organic Compounds for a Catalytic Oxidizer serving a Fiberglass Spa Manufacturing Company.
  • Destruction Efficiency testing for Volatile Organic Compounds for a Portable Thermal Oxidizer serving a Refinery.
  • Capture and Destruction Efficiency testing for Volatile Organic Compounds for a RTO serving a Carbon Steel tubing automated production line for a Tube and Conduit Industry.
  • Capture and Destruction Efficiency testing for Volatile Organic Compounds for a RTO serving a major Can manufacturing company.


  • Total and Hexavalent Chromium Testing for a HEPA filter serving chrome plating industries.
  • Inorganic Lead emissions testing for a HEPA filter serving Metal Melting Industries.
  • Air Toxics compounds (Multi-metals, Hcl, Total and Hexavalent Chrome including EPA TO-15 testing) for a Carbon Activated Processing plant.
  • Health Risk Assessment Model and Calculations for a Carbon Activated Processing plant.
  • Total Particulate Matter, PM10 and PM2.5 testing for Asphalt Industries.
  • Air toxics emissions testing on an Annealing furnace serving a Metal Fabrication Industry.
  • Air Toxics emissions testing for an Incinerator serving a Wastewater Reclamation facility.
  • Source Emissions Testing for Heat treating furnaces for a major Aircraft Company.
  • Air toxics emissions testing for an Electro-precipitator/Smog Hog for a major Aerospace Industry.
  • Volatile Organic Compounds testing for a Fryer/Smog Hog serving a large Meat packaging Industry.
  • Tenter frame (Drying Oven) testing for a Textile Industry.
  • Source Testing for Primer and Top Coat Finish Ovens serving Automotive Industries.
  • Particulate Matter testing for a Sand Reclamation and Conveying System.
  • Monthly air toxic emissions monitoring for benzene, 1,2-dichloroethane and formaldehyde on a flare.
  • SCAQMD Rule 1135 3-dimensional velocity and stratification flow measurement.
  • Pilot Scale Fuel Combustion Comparison Program.
  • SCAQMD Rule 218 performance specification test (PST) for continuous emissions monitoring system (CEMS).
  • SCAQMD Rule 1150.1 Destruction Efficiency Tests.
  • Compliance emissions testing on a portable flare system serving a Water District.
  • VOC capture and destruction efficiency for an open bed bio-filter.
  • NESHAP compliance for electroplating industries.
  • SCAQMD Rule 1142 compliance tests on Marine Vapor Control System (MVCS) at refineries.
  • Hexavalent chrome emissions testing on a plasma arc spray booth.
  • SCAQMD Rule 1134 compliance test on gas turbine generator sets for NOX at Los Angeles County Medical Center.
  • Visible Emissions Evaluation on the stacks in refineries and cogeneration facilities.
           Go To Top
ENERGY  ENVIRONMENTAL  SOLUTIONS,  INC.
2905 East Miraloma Avenue, Suite 7/8
Anaheim, CA 92806
TEL: (714) 630-5210
FAX: (714) ) 630-7844
email: info@sourcetester.com



Home | From CEO | Services | Rules 1121/1146.2 Certifications
Rule 1147 | RFQ | Contact Us

© EES, INC.
All Rights Reserved 2013